The Garmin GI 175 series — which includes the 175, 355, and 375 — has become the budget GPS upgrade for older general aviation aircraft. These compact touchscreen navigators slot in where a legacy nav/comm used to live, and they pack a surprising amount of capability into a small footprint. The problem is that most pilots never learn how to use more than about 20% of what the unit can do.
This tutorial walks through every major feature of the Garmin 175 from a DPE’s perspective. We’ll load a cross-country flight plan, customize the display, fly the route, work through an in-flight hold, plan a divert, and load an instrument approach — all in the free Garmin TXI Trainer software that you can download and follow along with at home.
Follow along for free: Garmin offers a free TXI Trainer Aviation app on their avionics training software page. Once installed, you can add the GI 175 panel within the app and practice everything covered in this tutorial.
The Setup: Loading a Flight Plan
For this tutorial, we’re flying a Cessna 182 from Tunica Municipal (KUTA) to Pine Bluff (KPBF). The route was chosen specifically to pass through Class B airspace so we can demonstrate the unit’s airspace alerting features. The full flight plan is: KUTA → JEPOB → V16 → PBF VOR → KPBF.
When you first boot up the 175, you’re greeted with a map page. The unit has a single physical home button (which doubles as the power button) and two knobs in the lower right corner for zoom, data entry, and page navigation. Everything else is touchscreen.
To load the flight plan, tap the FPL button in the lower right corner of the screen. The departure airport should auto-populate based on the nearest airport. From there, adding waypoints is straightforward — start typing and the unit’s fast-find feature will narrow down the results.
Victor Airways — the hidden gotcha: You cannot load a Victor Airway by typing “V16” into the waypoint search. The unit will return “No matches found.” Instead, tap on the entry waypoint (in our case, JEPOB), select Load Airway, and the unit will show you all airways that pass through that fix. Select the airway and your exit waypoint, preview it, and load.
Once the flight plan is built, you can store it in the unit’s non-volatile memory for reuse. Go to Menu → Store to save the route. The next time you fly, pull it back up from Menu → Catalog and activate it — no need to re-enter every waypoint.
Customizing User Fields
The map display has four user-configurable data fields in each corner. To change them, go to Menu → Configure User Fields. Some useful configurations:
- DTK vs. TRK (Desired Track vs. Current Track) — This is one of the most useful fields for maintaining situational awareness. When your track number matches your desired track, you’re paralleling your course. To actually intercept, your track needs to be greater than the desired track (for a correction back toward course).
- Distance to Destination — More useful than distance to next waypoint for overall trip awareness.
- Ground Speed — Self-explanatory but essential.
- VSR (Vertical Speed Required) — Tells you what descent rate you need to hit your vertical planning target. We’ll set this up later.
The small knob on the right can also hide and show the user fields. Push it in to toggle them off and declutter the display, push again to bring them back.
Map Settings & Smart Airspace
Tap Menu from the map page to access four pages of display settings. The highlights:
Orientation
Track Up, North Up, or Heading Up. Leave it on Track Up for most flying. The “North Up above 30 NM” setting automatically switches orientation when you zoom out to a big-picture view, which makes map reading more intuitive at wide zoom levels.
Smart Airspace
This is a standout feature. As you climb or descend, airspace that’s not a factor is grayed out, while airspace you’re approaching turns blue. In the tutorial, climbing through 3,700 feet caused the Class B floor (at 5,000 feet) to shift from gray to blue — a clear visual cue that the airspace is becoming a factor.
Range Ring & Track Vector
The range ring gives you an instant distance reference on the map — far more useful than estimating. The track vector shows where your aircraft will be in 60 seconds (configurable). When that vector touches your next waypoint, you’re about one minute out — a natural trigger for running your six T’s or a pre-waypoint checklist.
Other settings worth checking: turn on Obstacles and Wires (especially in flat terrain where tall antennas are common), set Airways to Low for GA operations, and enable TFRs.
Traffic Display
Use the large knob to cycle to the Traffic page (or customize it via System → Shortcuts). The traffic display goes beyond what the map page shows — tap on a target and you get its tail number, aircraft type, and ground speed.
Motion vector: Relative vs. Absolute. In relative mode, the motion vector shows the target’s path relative to your aircraft — if the arrow points behind you, it’s falling away. In absolute mode, it just shows the target’s track without factoring in your movement. Leave it on relative for the most useful traffic picture.
The altitude filter defaults to Normal, which shows traffic 2,700 feet above and below your altitude. You can switch to Above (9,900 feet above, 2,700 below) during climbs and Below during descents, but for most GA operations at 400–500 fpm climb rates, Normal is perfectly adequate.
Terrain & Obstacle Awareness
The terrain page shows elevation data relative to your altitude, with yellow indicating you’re within 1,000 feet of an obstacle and red meaning you’re within 100 feet. In the Mississippi Delta, there isn’t much high terrain, but there are plenty of 2,000- to 3,000-foot antenna towers — and the terrain page highlights every one of them.
Toggle between the Obstacles and Wire legend and the Terrain legend depending on what matters for your operation. For most low-altitude GA flying, the obstacles view is the more practical choice.
FISB Weather
The FISB (Flight Information Services — Broadcast) page gives you access to Nexrad radar, cloud tops, lightning, METARs, SIGMETs, PIREPs, Center Weather Advisories, Graphical AIRMETs, and TFRs. You can only view one radar product at a time (Nexrad, Cloud Tops, or Lightning), and the play button lets you animate radar imagery to see how weather is moving.
A few settings worth adjusting on the FISB page:
- Nexrad source — CONUS gives you the national picture, Regional gives you a local view, or Combined overlays both.
- AIRMET types — You can selectively enable or disable specific AIRMET categories (IFR, turbulence, icing, mountain obscuration, etc.).
- Forecast scope — “Current” shows only active products; “All Forecasts” includes outlooks. For shorter flights, Current keeps the display cleaner.
Nearest & Waypoint Info
The Nearest function shows the closest airports, intersections, VORs, NDBs, and airspace. Tap on any airport for tactical info — distance, available approaches, runway length, surface type, traffic pattern direction, and frequencies. You can even zoom in on the airport diagram to check the taxiway situation before you get there.
The Waypoint Info page works similarly but also lets you create custom waypoints — handy for private strips or custom fixes defined by a radial/DME. These are stored in non-volatile memory and persist across power cycles.
System Settings Worth Knowing
Bluetooth & Device Pairing
To connect an iPad or phone, make sure Bluetooth is enabled and Auto-Reconnect is selected for your device. Flight schools take note: these units have a device limit (typically 5–10 paired devices). Once that limit is hit, new devices can’t pair until old ones are removed. If a student can’t connect their EFB, check the paired device list first.
Backlight
The unit has an optical sensor for auto-brightness, but panel lights pointed at the sensor can fool it into full brightness at night. If your screen is blinding you after dark, lower the manual offset — just remember to bump it back up for daytime flying.
Page Shortcuts
The large knob cycles through three pages. Map is always page one, but you can customize pages two and three. The defaults are Terrain and Nearest, but Map → Traffic → FISB Weather may be a more practical setup for most flights.
Vertical Planning & Fuel Planning
Go to Home → Utilities → VCalc (Vertical Calculation) to set up descent planning. Enter your target altitude above the waypoint (1,000 feet AGL for a standard pattern), your desired descent rate (400 fpm is a comfortable number), and a distance offset (5 miles before the waypoint is a reasonable planning point).
Once configured, the VSR field on your map page comes alive — showing the descent rate required if you started descending right now. When the GPS displays an “Approaching top of descent” message, it’s time to start down.
The Fuel Planning utility works similarly. Enter your fuel on board, fuel flow rate, and ground speed, and it computes fuel remaining at your destination. This becomes critical during diversions — and we’re about to need it.
Holding Patterns
ATC throws us a curveball: disabled aircraft on the runway at Pine Bluff. We’re told to hold south of EUBEK, inbound course 346, right-hand turns, expect further clearance in one hour.
To load the hold: tap the waypoint in your flight plan, select Hold at Waypoint, set the inbound course (346), select inbound vs. outbound (inbound puts us south of the fix — which is what we were told), set right-hand turns, and choose your leg time (1 minute). Enter your EFC time, preview the hold to verify it looks correct, and load it.
Watch for the Unsuspend button. When you enter the hold, the GPS suspends automatic flight plan sequencing. The “Unsuspend” button at the bottom of the screen is your indicator that the flight plan won’t sequence past this point until you tell it to. When ATC clears you to leave the hold, tap your FPL, select the hold, and choose Exit Hold.
While holding, use the fuel planning utility to check your alternate. In the tutorial, a quick calculation showed we had only about 10 minutes of holding time before we’d violate our personal minimum of one hour of fuel remaining at the alternate (Stuttgart, KSGT). The Clock & Timers utility lets you set a countdown timer — and you can even put that timer in one of your map user fields so it’s always visible.
The Scheduled Messages feature is another hidden gem. Create a periodic timer called “FUEL” set to 30 minutes, and the GPS will remind you to switch tanks — invaluable for PA-28s and other aircraft with separate left/right fuel selectors.
Loading Approaches
There are three ways to load an approach: from the Waypoint Info page, from Home → Procedure → Approach, or by tapping the destination runway in your flight plan and selecting Load Procedure. The quickest method is usually the flight plan route.
Always preview before loading. In the tutorial, we compared the ILS approach (which had no TAA and required radar vectors) with the RNAV LPV (which had intermediate fixes we could fly to directly). The RNAV was the better fit for our scenario, so we loaded it with the EUBEK transition.
The “Activate Approach” trap: This is a mistake I see on checkrides regularly. A pilot gets busy, realizes they haven’t activated the approach, panics, and hits Activate Approach — which sends the GPS back to the initial approach fix they already flew through. The aircraft starts turning back, and now they have to get vectors for a second attempt. If you’ve already passed the IAF, don’t use Activate Approach. Instead, tap FPL, find the next waypoint on the approach, and select Activate Leg to fly the segment you’re actually on.
Other Utilities
- Density Altitude & True Airspeed — An in-panel E6B. Select “Use Sensor Data,” hit Compute, and get DA, TAS, and wind instantly.
- RAIM Prediction — Verifies GPS receiver integrity for your destination at your planned arrival time. Required for IFR operations and easy to forget.
Bottom Line
The Garmin 175 series is a capable piece of equipment, but that capability only helps if you know it’s there. Too many pilots show up for a checkride having barely touched the simulator, and it shows. The free Garmin TXI Trainer lets you practice everything covered here — flight plan loading, holds, approaches, diversions, the works — on your own time. The last thing you want is to discover a critical feature for the first time with a DPE sitting next to you.
Download the trainer, build a cross-country route, and fly it start to finish. Practice a hold. Load an approach. Intentionally break things and figure out how to recover. That’s how you build real proficiency with this equipment.
VSL ACE Guide
The ACE Guide is the FAA reference system used across VSL’s content. Every ACS element links directly to the source material in the Airplane Flying Handbook, Instrument Flying Handbook, and dozens of other FAA documents — all in one searchable PDF.
Get the ACE Guide →